1973 Datsun 240z For Sale


So I really am looking to sell the 240z this time around. Though, the more time I spend on it, the less I want to sell it, so perhaps I’ll continue working on it while I wait to see if it sells, and then who knows what will happen after that. At this point in time I’m not looking to part the car out, that might change in the future, but for now I’ll keep from parting it out.

1973 Datsun 240z For SaleBasics:
Price: $1750 with all the spare parts (storage bins full), $1250 with the car as it currently sits. (add $250 to clean up title)
Make: Datsun
Model: 240z
Title: None (can be acquired at additional cost)
Mileage: Unknown
Location: Parker, Colorado (delivery available at $1.25.mile up to 500 miles from Parker, CO)
Thoughts: Depending on the needs, I can get the title cleared up on this car. I have a California title from a previous owner, I’ve signed it, but never got it titled in my name. It is going to cost me a couple hundred dollars to get the title in my name due to fees, if the purchaser needs a title we can have this done.

L28E from a 1977 Datsun 280z 2+2
Intake/Exhaust Manifolds from a 1983 280ZX Turbo
Turbo from a 1983 280ZX Turbo
Oil cooler not currently installed, bypassed, parts all there.
Exhaust, straight pipe coming off the turbo, currently dumps under the driver
Thoughts: The motor runs, though it is a tad picky to start. I’m pretty sure it’s a combination of the manifolds and megasquirt needing some adjustment, knowledge I just don’t have.

5 Speed from 1977 Datsun 280z 2+2, new urethane bushings on transmission mount.
Thoughts: Transmission works great as far as I know, worked in the parts car that I got it out of, and also drove fine with the previous motor in this car.

Fuel System:
Tank: 15 Gallon Fuel Cell
Pump: High Pressure Pump (from Jegs)
Lines: Stainless steel primarily 8AN 
Rail: Custom aluminum rail from Lonewolf Performance
Injectors: Ford Racing 42lb/hr
Pressure Regulator
Thoughts: No known issues with the fuel system, everything works as it should.

Megasquirt (purchased/assembled from DIYAutoTune)
MS130-C Assembled Megasquirt-I with V3.0 PCB
MOD_130-EDIS: EDIS mods
LC-1 without gauge
Thoughts: As far as I know everything works great with the Megasquirt, the only issues are that I don’t know enough to properly tune everything.

Stock 1973 240Z
Spare suspension parts also off a 1973 240z, w/ front/rear sway bars (spares not included for $1250)
I have a urethane bushing kit for the car, but so far have only put bushings into the steering coupler and the transmission cross member. (kit not included at $1250 price)
Thoughts: The suspension is something I intended to address after having the car together, painted, and running.

Stock steel wheels, R-Compound Hoosier Tires
Thoughts: Nothing special here

Seats: None
Dash: Removed, fiberglass dash available (dash not included at $1250)
Carpet: None
Paint: Interior painted in a black undercoating, except for the dash area which was removed after paint.
Thoughts: The interior needs some love depending on your intentions. I had planned to put a cage in, but haven’t had it done. I had some Corbeau A4 seats in the car, on custom welded in mounts, but the seats were too tall. Putting in other seats may require some fabrication work. My intention was to put in a race seat.

Hood and headlight buckets from a 1977 280Z 2+2
Doors and rear hatch (w/ spoiler) from a different 73 240z
Air Dam, not sure of make, needs paint scraped off and painted.
Thoughts: Passenger floor pan had some rust, cut out and welded in new metal. Floor then covered in fiberglass. The rust doesn’t appear too bad elsewhere, but I’ve not stripped the car looking for things. The body definitely needs some love and a paint job to get the car cleaned up. The passenger door needs some adjustment, it doesn’t close easily but will shut and stay closed.

Pictures and Video:
I posted a lot of pictures of the car that I took yesterday, you can see them on this Flickr Set. If you would like to see other photos of specific parts please let me know.
I also took a video of the car running yesterday, you can see it starts off rough, but once going doesn’t sound half bad. Video of the 240z Running

Final Thoughts:
I am torn on selling the car, as you can see in the intro to this post. I’ve had it for three and a half years now, and I would love to have the time to finish it, but to be honest I haven’t had time over the past 3.5 years, I don’t foresee having the time/motivation to do it anytime soon. I’m not going to part the car out, and if it doesn’t sell, perhaps i will find the time to do more on the car. I spent a few hours cleaning things up yesterday and renewed my motivation to want to work on the car, but still not enough to decide not to sell it.

If you are interested looking at the car please use the contact form here on Project240z.com, the car is only available on the weekends to be looked at right now.


The two domain names, www.project240z.com and www.240z.net are not included in this sale, but may be available if someone is interested in those.

Recent Comments

I definitely say you should hang on to it, button it up, and drive the snot out of it. I'd been strongly considering selling my project 240z as well, but decided that I'll just finish it up completely instead. Not only will it be worth substantially more, but I won't feel like it's such a burden to complete any more.
Posted By: Jesse O'Brien on 1/7/2010 5:34:40 PM
I like excuse much your car and I am interested gustaria in knowing the price and all that me saldria to bring it to mexico if one can alive(vivacious) I in monterrey, mexico forgives the inconveniences(troubles) and thank you very much
Posted By: jose aurelio nacianceno on 3/21/2010 6:33:15 PM
is your 240 still for sale can you contact me @208 467 2557
Posted By: mike nguyen on 3/29/2010 1:16:27 PM
Hey Chris nice z. I was wondering if you or anyone can help get a title for a 1972 and 1971 240z ? I purchased both with not title and was planning on parting them out until I got them home and saw how nice they were.
Posted By: D D on 11/15/2010 6:36:56 PM
D D I have no idea how you would go about titling cars that don't have titles. I would contact your DMV
Posted By: Chris Hammond on 11/16/2010 1:48:01 PM

Add Comment

Please add your comment by filling out the field(s) below. Your comment may need to be approved before it becomes visible.
Enter your first name for display with the comment
Enter your last name for display with the comment.
Enter your comment here.
If you can't type Human2 in, you can't post, plain and simple.
Submit Comment Cancel